Module QuickPort eXtreme de cat.6, ivoire

Connecteur QuickPort eXtreme de cat. 6, ivoire

Le connecteur cat. 6 eXtreme de Leviton est conçu pour être utilisé avec tous les produits compatibles QuickPort de Leviton. Le connecteur est doté de la technologie de rétention brevetée qui favorise des rendements cohérents pendant la durée de vie du système. Il comporte des tours de séparation des paires uniques permettant d'effectuer des terminaisons plus rapidement et plus facilement. Le connecteur est configuré à 180 degrés, de sorte que le champ à percussion se trouve à l’arrière, permettant d'effectuer la terminaison par l’arrière.

STANDARDS COMPLIANCE
• ANSI/TIA-568-C.2
• ISO/IEC 11801
• ANSI/TIA-1096-A (formerly FCC Part 68)
• cULus Listed
• IEEE 802.3at (Type 1) Power over Ethernet (PoE) up to 15.4 watts
• IEEE 802.3at (Type 2) PoE+ up to 30 watts
• IEEE 802.3bt (Tpe 3) PoE+ up to 60 watts
• IEEE 802.3bt (Type 4) PoE+ up to 100 watts
• Cisco Universal Power Over Ethernet (UPOE) up to 60 watts
• Power over HDBaseTTM (POH) up to 100 watts

PHYSICAL SPECIFICATIONS
Materials:  Connector Body: High-impact, fire-retardant plastic rated UL 94V-0.
                    Spring-Wire Contacts: High-quality copper-based alloy, plated with 50 micro-inches of gold over 100
                    micro-inches of nickel for lowest contact resistance, maximum life.

Environmental Conditions:

                    Storage Temperature: -40 ºC to +70 ºC
                    Operating Temperature: -10 ºC to +60 ºC

SPECIFICATION

The connector shall meet or exceed the requirements for channel- and component-level performance as described in ANSI/TIA-568-C.2 Category 6 standards, as well as the Class E requirements described in ISO/IEC 11801. The connector shall be individual snap-in style. The connectors shall also be in compliance with all National Electrical Codes; compliant with ANSI/TIA-1096-A; UL listed; and independently verified. In addition to Category 6 compliance, the connector shall
have the ability to support high-megabit and shared-sheath applications. All plastics used in construction of the connector bodies shall be fire retardant with a UL flammability rating of 94V-0. Termination of all connectors shall be 110-type insulation displacement connectors (IDC). The connector shall provide a ledge directly adjacent to the 110-style termination against which the wires can be terminated and cut in one action by the installation craftsperson. Connector wiring is
universal and will accommodate installation color codes for T568A and T568B wiring schemes. The termination field shall be in the rear for easy access. The connector shall fit in a variety of telecommunications wallplates, outlets, and field-configurable patch panels and patch blocks.