Home Page    Site map    Members    Contact us    Français
Logo BBB    HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Cablek industries Services News Technical reference
0 items
   

High quality T1 cable assemblies

# Cablek : 
T1 CABLES

T1 Cable Assemblies

T1 cables allow you to connect DSU/CSU to DDS lines.

 

Cablek's standard T1 cables are built with 22 AWG solid 100 Ohm oval T1 cable and are RoHS compliant.

 

These are custom made cables. Cablek stocks the necessary components to manufacture all configurations and lengths. Email us with your requirements.

 

T1 cable is used with RJ-48 male connectors. The RJ-48 connector may look very similar to an RJ-45 connector found on a typical CAT-5 cable, but don't be fooled, they are very different in many ways. An RJ-48 connecter is fastened on to an STP (Shielded Twisted Pair) cable, not the standard UTP (Unshielded Twisted Pair) CAT 3,5 or 6 cable. An RJ-48 also uses a different pin out arrangement, voltage level, and line capacitance than an RJ-45.

 

  • RJ48 Patch Cable with two shielded pairs for T-1 applications
  • Unique, two-layer insulation system provides electrical performance required for T-1 pulse rates
  • Shielding protects against EMI/RFI interference
  • Premium RJ48 style plugs with 50-micro inches gold plating for maximum performance

Available in the following configurations:

T1 RJ48 - DB 15

 

  • T1 RJ48 to DB15 Female Straight Thru Cable
  • T1 RJ48 to DB15 Female Crossover Cable
  • T1 RJ48 to DB15 Male Straight Thru Cable
  • TI RJ48 to DB15 Male Crossover

     

     

  •  


     

     

     

     

     

     

     

    T1 RJ48 - RJ48

    • T1 RJ48 to T1 RJ48 Crossover Cable
    • T1 RJ48 to T1 RJ48 Straight thru Cable

     


    T1 DB15 - BLUNT

     

  • T1 DB15 Male to Blunt Cable
  • T1 DB15 Female to Blunt Cable


  •  

     

     

     

     

     

     

    T1 RJ48 - BLUNT

    • T1 RJ48 to Blunt Cable

     


     

    T1 DB15 - DB 15

     

  • T1 DB15 Female to DB15 Female Straight Thru Cable
  • T1 DB15 Female to DB15 Female Crossover Cable
  • T1 DB15 Male to DB15 Female Straight Thru Cable
  • T1 DB15 Male to DB15 Male Straight Thru Cable
  • T1 DB15 Male to DB15 Male Crossover Cable
  •  

     

     

     

     

     

     


     

     

    Cable Specifications:

    T-1, 2 pair, 22 AWG solid, 2-layer insulation, beige oval PVC jacket, each pair shielded. RoHS compliant.

     

    Construction Details
    Cond. Stranding: 22 AWG solid tinned
    Insul/Thickness: 2-layer Polyolefin .020 inch (.51 mm)
    Jacket/Thickness: Oval PVC .022 inch (.56 mm)
    Jacket Color: Beige
    Nom. Diameter: 0.178 inch x 0.315 inch (4.52 mm x 8.00 mm)
    Shielding: Each pair with isolated alum./polyester tape, solid 24 AWG drain wire

     

    Electricals (NOM)
    Cond. DC Resistance: 16.10 Ohms/kft (52.82 Ohms/km)
    Cond. to Cond. Capacit.: 15.0 pF/ft (49.2 pF/meter)
    Cond. to Shield Capacit: N/A
    Impedance: 100 Ohms @ 1MHz
    Velocity of Propagation: 71%

     

    Listing and Ratings

    NEC and CEC Type CMR
    Attenuation -5.5 dB/1000ft @ 772 KHz
    Telcordia GR 137-CORE compliant
    Reduces NEBS and FCC system emissions significantly


     

    Note: THIS IS A CUSTOM NON-RETURNABLE PART.

    Related products


    V.35 - CABLE ASSEMBLIES

    Product number:
    V.35 CABLE


    Custom Cable & Harness Assemblies

    Product number:
    Custom_Cable_Harness

    Terms and Conditions - Information
    Copyright © 2017 All rights reserved