RS-232 RS-485/RS-422 Bidirectional Converter - DB25F
Internal Reference :Description :
CON-IC/485
Internal Reference:
CON-IC/485
RS-232 RS-485/RS-422 Bidirectional Converter - DB25F
Cablek's CON-IC/485 is a hardware solution to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000'), over four or two wire cable for full or half duplex, respectively.
The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter.
Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. The CON-IC/485 is a bi-directional interface converters for RS-232 and RS-485. The CON-IC/485 also provides an extra Monitoring function. Two slide switches are used to configure its operation mode, contention control, and assignment of the RS-232.
Features:
- Data Transmission Controlled by the RTS Signal
- DCE/DTE Selectable
- Point to Point, Multidrop and Simplex/Duplex Link Selectable
- Four Wire Full Duplex / Two Wire Half Duplex
- Monitor Configuration Support
- Compact Size
- Unit Pack Wt. 0.9 lb. (0.4 kg)
Package Content:
- 1 x IC485S bi-directional isolated converter
- 1 x Power adapter
- 1 x User manual
- 1 x Warranty registration card
Specification:
- Power Consumption: DC9V, 1.35W (max.)
- Cable Distance: 1200 m (4,000 Ft)
- Data Rate Up to 100 Kbps under 1200 m (4,000 Ft)
- Function Switches: SW1(DCE, DTE, Monitor), SW2(TxON, RxON,TxRTS, RxRTS,TxRTS, RxON)
- Connectors: 1 DB-25 Female (RS-232), RS-485 / RS-422 Four Terminal Block, RJ-11
Unit Dimensions
- Width: 2.2 in. (5.6 cm)
- Height: 3.2 in. (8.1 cm)
- Depth: 0.8 in. (2.1 cm)
Unit Package Dimensions
- Width: 6.3 in. (2.8 cm)
- Height: 2.3 in. (5.4 cm)
- Depth: 9.5 in. (24.1 cm)