12-Fiber OM4 Multimode Fiber Optic Cable, Indoor/Outdoor, Tight Buffer OFNR

OM4 12-Fiber Water-Blocked/Sunlight Resistant Indoor/Outdoor  -  OFNR   

Tight Buffer Riser Rated OFNR OM4

Applications

• Intra/Inter-building Backbones
• Trench & Conduit/Duct/Tray pathways
• Dry or wet locations

Water-blocked (dry technology), sunlight resistant indoor/outdoor tight buffer riser rated cable line offers the system designer the ultimate in premises fiber optic cable utility.

Cable can be installed 

• In open spaces
• Trays
• Conduits
• Inner-ducts
• Trenches (within conduits)
• Steam tunnels
• Building riser locations.

Cable incorporates the latest in dry-water blocking technology. This system of water blocking eliminates the need to clean off the traditional gel-based water-blocking compounds found in loose-tube cables. In addition, breakout kits and or other special termination equipment associated with loose tube OSP cables are not required. The outer jacket is comprised of a rugged UL listed sunlight resistant polymer that allows for the cable to be exposed to long-term direct sunlight without the concern of material degradation. 

Physical Description

• Single-unit Design (6 – 12 Fibers): the design consists of flexible tight buffer material extruded over the fiber to a diameter of 900 ìm. Multiple 900 ìm, color coded fibers are combined with aramid and water-blocking elements to obtain proper strength and water-blocking characteristics. The core construction is then covered with flame, chemical and sunlight resistance black outer jacket.

Features

• Tested and Qualified to GR-409 and GR-2961
• Exceeds TIA/EIA 568-B.3 optical performance
• Dry-block design meets Telcordia GR-20 water block requirements
• 900 ìm tight-buffered fibers
• Black, UL listed Sunlight Resistant and outer jacket
• UL/NEC Listed OFNR/FT4
• All – dielectric

Benefits

• Assurance that cable investment is maintained over the life of the system
• Future-proof fiber performance for current and future multi-gigabit applications
• Cable integrity maintained even if damage occurs to protective layers
• Direct connectorization without additional hardware
• Confidence that cable will last even with long-term exposure to direct sunlight
• Eliminates the need to purchase separate cables for OSP and indoor/riser applications
• No additional grounding materials need to be purchased
• Saves time in cable preparation

Environmental Specifications

• Riser Operation:  -40°C to + 75°C
• Storage/Shipping:  -40°C to + 75°C
• Installation:  -20°C to + 65°C
• Crush:  10N/mm
• Impact:  6 N-m