SFF-8470 to SATA 7pin Female w/ Latch (x4)
Internal Reference :Description :
SFF-8470/SATA/4-1M
Internal Reference:
SFF-8470/SATA/4-1M
SFF-8470 to SATA 7pin Female w/ Latch (x4) Cable
Cablek's SAS to SATA breakout cable has an external 34-pin SFF-8470 male SAS plug (with locking thumbscrews) on one end and four internal 7-pin female SATA plugs (with locking latches), allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.
‘latching' SATA 7-pin connectors |
SAS technology guarantees performance at 3.0 Gigabits per second. This 4x SAS cable features SAS type SFF-8470 thumbscrew connectors and External SATA connectors. SAS to SATA breakout crossover cables connect a SFF-8470 SAS Controller directly to 4 SATA drives.
Specifications:
- Length = 1Meter
- Wire Size (AWG) = 28
- Connector A = SFF-8470 (Thumbscrews)
- Connector B = (4) SATA (SATA )
- Crossover Wiring
- Impedance = 100 Ohms
- High performance 8 pair wire construction
- Exceeds SAS and SATA 2 Specification
-
Lifetime Warranty
Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA. This allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements. |
Specifications
Length | 1 m |